XP-3A brushless ESC 3A 1S micro 0.7g electronic speed controller for mini micro aircraft airplane tail ESC helicopter BLHELI

Features:

 

1. Equipped with high-speed, small-sized, multifunctional MCU.

 

2. Full protection feature including low-voltage protection, over-heat protection, signal lost protection, safe power on protection.

 

3. Excellent startup performance, great throttle linear and quick throttle response.

 

4. Max speed: 240,000 RPM (2 poles), 80,000 RPM (6 poles), 40,000 RPM (12 poles).

 

5. The parameters of ESC can be configured via transmitter or program card.

 

6. Throttle range can be configured to be compatible with different receivers.

 

 

 

Specification:

 

Input voltage: 2.8V -4.2V (support 1 lithium batteries)

 

Continue current: 3A

 

Burst current: 4A (within 10 seconds) 

 

BEC output: NO

 

Program Function: YES

 

Size (lengthX width X high): 11x13x8 mm

 

Weight: 0.7 g

 

 

 

Parameter:

 

   1）BrakeType: Off,Soft brake and Hard brake. default is Off (brake disable). Soft brake: less  forceful and brake time is longer. Hard brake:more forceful and brake time is shorter.

 

   2）AdvanceT (Timing Mode): Low, Middle and High, default is Middle. Low advance timing is recommended for high inductance and low KV motors. High advance timing is recommended for low inductance and high KV motors, e.g. high KV outrunner motors. For some high KV motors, if it shakes while rotating in high speed, the “High” timing mode is recommended.

 

   3）Start: Fast, Soft and Very Soft. default is Very Soft. Fast start is recommended for low inductance and low start loading motors, Very Soft start is recommended for high inductance and high start loading motors.

 

   4）OffType (Cutoff Mode,Low Voltage Protection Mode): Reduce power and Cutoff output power for selecting,default is Reduce the output power gradually to 50% of the current power.

 

   5）Cutoff  threshold: 2.8V, 3.0V, 3.1V. default is 2.8V.

 

Many customers use this 3A ESC as tail ESC for micro helicopters and flash BLHELI firmware.